| Manufacturer: | SEAGATE |
| Manufacturer Part No: | ST10000VE001 |
| General |
| Device Type: | Hard drive - internal |
| Capacity: | 10 TB |
| Form Factor: | 3.5" |
| Interface: | SATA 6Gb/s |
| Buffer Size: | 256 MB |
| Features: | Native Command Queuing (NCQ), Enhanced ECC On The Fly, PowerChoice, Worldwide Name (WWN), Perpendicular Recording, tarnish-resistant, state-of-the-art thermal control, S.M.A.R.T. |
| Width: | 101.6 mm |
| Depth: | 147 mm |
| Height: | 26.1 mm |
| Weight: | 720 g |
| Performance |
| Drive Transfer Rate: | 600 MBps (external) |
| Internal Data Rate: | 245 MBps |
| Average Latency: | 4.16 ms |
| Spindle Speed: | 7200 rpm |
| Reliability |
| MTBF: | 2,000,000 hours |
| Non-Recoverable Errors: | 1 per 10^15 |
| Load / Unload Cycles: | 300,000 |
| Expansion&Connectivity |
| Interfaces: | 1 x SATA 6 Gb/s |
| Compatible Bay: | 3.5" |
| Power |
| Power Consumption: | 10.09 Watt (typical)
7.76 Watt (idle)
0.96 Watt (sleep)
0.96 Watt (standby) |
| Software&System Requirements |
| Software Included: | Seagate SeaTools |
| Environmental Parameters |
| Min Operating Temperature: | 0°C |
| Max Operating Temperature: | 65°C |
| Min Storage Temperature: | -40°C |
| Max Storage Temperature: | 70°C |
| Humidity Range Operating: | 5 - 95% |
| Shock Tolerance (operating): | 70 g @ 2 ms |
| Shock Tolerance (non-operating): | 300 g @ 2 ms |
| Vibration Tolerance (operating): | 1.04 g @ 10-500 Hz |
| Vibration Tolerance (non-operating): | 2 g @ 10-500 Hz |
