Manufacturer: | CISCO |
Manufacturer Part No: | CW9164I-MR |
General |
Device Type: | Radio access point |
Ruggedized Design: | Indoor |
Width: | 24.13 cm |
Depth: | 24.13 cm |
Height: | 5.69 cm |
Weight: | 1.6 kg |
Processor / Memory / Storage |
RAM: | 2 GB |
Flash Memory: | 1 GB |
Networking |
Form Factor: | External |
Connectivity Technology: | Wireless |
Data Transfer Rate: | 7.49 Gbps |
Line Coding Format: | OFDMA |
Data Link Protocol: | Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, Bluetooth 5.1 LE, IEEE 802.11ax (Wi-Fi 6E) |
Spread Spectrum Method: | OFDMA |
Remote Management Protocol: | HTTP |
Cloud-Managed: | Yes |
Frequency Band: | 2.4 GHz, 5 GHz, 6 GHz |
Status Indicators: | Status |
Features: | DFS support, WLAN controller mode, LLDP support, Maximum Ratio Combining (MRC), universal power over Ethernet (UPOE), cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, band steering, Dynamic Frequency Selection (DFS), secure boot, 2x2:2 MU-MIMO technology, 4x4:4 MU-MIMO technology, image signing, Cisco Trust Anchor module, BSS Coloring, Cisco Meraki compatible, Target Wake Time (TWT) |
Encryption Algorithm: | AES, PEAP, WPA2-Enterprise, EAP-SIM, WPA3-Enterprise, WPA3-Personal, EAP-FAST, WPA3-Enhanced Open, WPA2-Personal, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC, PEAPv1 |
Authentication Method: | MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM |
Compliant Standards: | IEEE 802.3, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6E |
Aerial |
Antenna: | Internal |
Directivity: | Omni-directional |
Internet of Things (IoT) |
Internet of Things (IoT) Compatible: | Yes |
Communications Technology: | Bluetooth Low Energy (LE) |
Expansion / Connectivity |
Interfaces: | 1 x 100/1/2.5GBase-T (UPOE) - RJ-45 1 x management - RJ-45 1 x USB 2.0 |
Miscellaneous |
Compliant Standards: | FCC Part 15.247, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.407, FCC CFR47 Part 15 C, FCC CFR47 Part 15 B, UL Class III, CNS13438:2006, RSS-247, AS/NZS 2772.2, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016, RSP-100, RSS-GEN, EN 301 893 V2.1.1, AS/NZS 4268:2017, EN 300 328 V2.2.2, EN 50385:2017, 47 CFR Part 2.1091, QCVN 112:2017, Japan Std. 66, Japan Std. 71, EN 61000-3-3:2013+A1:2019, IEC 61000-3-2:2019, CAN/CSA-C22.2 No. 62368-1 Third Edition, UL 62368-1 Third Edition, EN 62368-1 Third Edition, IEC 62368-1 Third Edition, EN 301 489-17 V3.2.4 (2020-09), EN 301 489-1 V2.2.3 (2019-11), KS C 9832, EN 55032:2015+A11:2020, EN 62311:2020, KS X 3124:2020, KS X 3126:2020, EN 61000-6-1:2019, Draft EN 303 687 V0.0.14, EN55035:2017+A11:2020, AS/NZS 62368-1 Third Edition, CISPR 32:2015+AMD1:2019, AS/NZS CISPR32:2015+AMD1:2020, ICES-003 issue 7 Class B, KS C 9835:2019, LP002 |
Power |
Power Over Ethernet (PoE) Supported: | UPOE |
Software / System Requirements |
Software Included: | Meraki Dashboard |
OS Required: | Cisco IOS XE 17.9.1 or later |
Manufacturer Warranty |
Service&Support: | Limited warranty - advance hardware replacement - lifetime - response time: 5 days |
Environmental Parameters |
Min Operating Temperature: | 0°C |
Max Operating Temperature: | 50°C |
Humidity Range Operating: | 10 - 90% (non-condensing) |