| Manufacturer: | CISCO |
| Manufacturer Part No: | C9200-48T-E |
| General |
| Device Type: | Switch - 48 ports - L3 - Managed - stackable |
| Enclosure Type: | Rack-mountable |
| Subtype: | Gigabit Ethernet |
| Ports: | 48 x 10/100/1000 |
| Performance: | Stacking bandwidth: 160 Gbps
Switching bandwidth: 176 Gbps
Forwarding rate: 261.9 Mpps |
| Capacity: | Virtual networks: 4
IPv4 routing table entries: 4000
IPv6 routing table entries: 2000
Flexible NetFlow entries: 16000
Packet buffer size: 6 MB
VLAN IDs: 4096
Switched virtual interfaces (SVIs): 1000 |
| MAC Address Table Size: | 32000 entries |
| Jumbo Frame Support: | 9198 bytes |
| Routing Protocol: | OSPF, RIP, IS-IS, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP |
| Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
| Encryption Algorithm: | 128-bit AES |
| Features: | ARP support, Spanning Tree Protocol (STP) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), Cisco StackWise-160 technology, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR) |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
| RAM: | 4 GB |
| Flash Memory: | 4 GB |
| Expansion / Connectivity |
| Interfaces: | 48 x 10/100/1000 Base-T RJ-45
1 x network stack device
1 x management (LAN) RJ-45
1 x console RJ-45 |
| Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
| Power |
| Power Device: | Internal power supply - hot-plug |
| Installed Qty: | 2 (max) |
| Power Redundancy: | Optional |
| Power Provided: | 125 Watt |
| Voltage Required: | AC 120/230 V (50 - 60 Hz) |
| Miscellaneous |
| MTBF: | 571,440 hours |
| Compliant Standards: | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35 |
| Dimensions&Weight |
| Width: | 44.5 cm |
| Depth: | 35 cm |
| Height: | 4.4 cm |
| Weight: | 5 kg |
| Environmental Parameters |
| Humidity Range Operating: | 5 - 90% (non-condensing) |
| Min Storage Temperature: | -40°C |
| Max Storage Temperature: | 70°C |
| Humidity Range Storage: | 5 - 90% (non-condensing) |
