Manufacturer: | CISCO |
Manufacturer Part No: | C9300-24U-E |
General |
Device Type: | Switch - 24 ports - L3 - Managed - stackable |
Enclosure Type: | Rack-mountable 1U |
Subtype: | Gigabit Ethernet |
Ports: | 24 x 10/100/1000 (UPOE) |
Power Over Ethernet (PoE): | UPOE |
PoE Budget: | 830 W |
Performance: | Switching capacity: 128 Gbps Stacking bandwidth: 480 Gbps Forwarding rate: 154.76 Mpps |
Capacity: | IPv4 routing table entries: 32000 IPv6 routing table entries: 16000 Flexible NetFlow entries: 64000 VLAN IDs: 4000 Switched virtual interfaces (SVIs): 2000 |
MAC Address Table Size: | 32000 entries |
Jumbo Frame Support: | 9198 bytes |
Routing Protocol: | OSPF, IS-IS, RIP-1, RIP-2, EIGRP, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
Encryption Algorithm: | 128-bit AES |
Features: | Trunking, full duplex mode, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, FTP client, 3 fans, Control plane protection (CoPP), Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Encapsulated Remote SPAN (ERSPAN), Security Group Access Control List (SGACL), IT Service Management (ITSM) integration |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
RAM: | 8 GB |
Flash Memory: | 16 GB |
Status Indicators: | Status |
Expansion / Connectivity |
Interfaces: | 48 x 1000Base-T RJ-45 UPOE 1 x USB 2.0 |
Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
Power |
Power Device: | Internal power supply - hot-plug |
Installed Qty: | 1 (installed) / 2 (max) |
Power Redundancy: | Optional |
Power Provided: | 1100 Watt |
Voltage Required: | AC 120/230 V (50 - 60 Hz) |
Miscellaneous |
MTBF: | 238,410 hours |
Compliant Standards: | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1 |
Software / System Requirements |
OS Required: | Cisco IOS Universal |
Dimensions&Weight |
Width: | 44.5 cm |
Depth: | 44.5 cm |
Height: | 4.4 cm |
Weight: | 7.54 kg |
Manufacturer Warranty |
Service&Support: | Limited warranty - replacement - lifetime - response time: next business day Technical support - consulting - 90 days |
Environmental Parameters |
Min Operating Temperature: | -5°C |
Max Operating Temperature: | 45°C |
Humidity Range Operating: | 5 - 90% (non-condensing) |
Min Storage Temperature: | -40°C |
Max Storage Temperature: | 70°C |
Humidity Range Storage: | 5 - 90% (non-condensing) |