| Manufacturer: | CISCO |
| Manufacturer Part No: | WS-C2960XR-48TD-I |
| General |
| Device Type: | Switch - 48 ports - L3 - Managed - stackable |
| Enclosure Type: | Desktop, rack-mountable 1U |
| Subtype: | Gigabit Ethernet |
| Ports: | 48 x 10/100/1000 + 2 x SFP+ |
| Performance: | Switching capacity: 216 Gbps
Forwarding performance: 130.9 Mpps |
| Capacity: | Virtual interfaces (VLANs): 1023 |
| Jumbo Frame Support: | 9216 bytes |
| Max Units In A Stack: | 8 |
| Routing Protocol: | OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng |
| Remote Management Protocol: | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI |
| Authentication Method: | Secure Shell (SSH), RADIUS, TACACS+ |
| Features: | Layer 2 switching, auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS) |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az |
| Processor: | 1 x ARM: 600 MHz |
| RAM: | 512 MB |
| Flash Memory: | 128 MB |
| Status Indicators: | Port status, port transmission speed, port duplex mode, system, link/activity |
| Expansion / Connectivity |
| Interfaces: | 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45
2 x SFP+
1 x USB Type A
1 x USB Type B
1 x console RJ-45
1 x management (LAN) RJ-45 |
| Power |
| Power Device: | Internal power supply - hot-plug |
| Installed Qty: | 1 (installed) / 2 (max) |
| Power Redundancy: | Yes |
| Power Redundancy Scheme: | 1+1 |
| Power Provided: | 250 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Miscellaneous |
| MTBF: | 440,880 hours |
| Compliant Standards: | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, CB, ICES-003 Class A, RoHS, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, FCC Part 15 A, CSA C22.2 No. 60950-1, VCCI Class A, KN22, KN24, EN 300 386 |
| Software / System Requirements |
| Software Included: | Cisco IOS IP Lite |
| Dimensions&Weight |
| Width: | 44.5 cm |
| Depth: | 40.8 cm |
| Height: | 4.45 cm |
| Weight: | 6.1 kg |
| Manufacturer Warranty |
| Service&Support: | Limited warranty - lifetime |
| Environmental Parameters |
| Min Operating Temperature: | -5°C |
| Max Operating Temperature: | 45°C |
| Humidity Range Operating: | 10 - 95% (non-condensing) |
| Min Storage Temperature: | -25°C |
| Max Storage Temperature: | 70°C |
| Humidity Range Storage: | 10 - 95% (non-condensing) |
