| Manufacturer: | NETGEAR |
| Manufacturer Part No: | GS728TX-100NES |
| General |
| Device Type: | Switch - 28 ports - smart - stackable |
| Enclosure Type: | Rack-mountable 1U |
| Subtype: | Gigabit Ethernet |
| Ports: | 24 x 10/100/1000 + 2 x 10Gb Ethernet + 2 x 10Gb Ethernet SFP+ |
| Performance: | Bandwidth: 128 Gbps |
| Capacity: | VLANs supported: 256
ACL entries: 100
IPv4 routes (static): 32
DHCP snooping entries: 8000
ARP entries: 512
Forwarding table entries (Multicast): 512
Priority queues per port: 8 |
| MAC Address Table Size: | 16K entries |
| Jumbo Frame Support: | 9KB |
| Max Units In A Stack: | 6 |
| Routing Protocol: | Static IPv4 routing |
| Remote Management Protocol: | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, HTTP, HTTPS, TFTP, CLI |
| Authentication Method: | RADIUS, TACACS+ |
| Features: | Flow control, trunking, VLAN support, IGMP snooping, Syslog support, DoS attack prevention, ALG support, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, store and forward, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, SNTP support, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Dynamic ARP Inspection (DAI), DHCP client, Energy Efficient Ethernet, dual firmware images, Strict Priority Queuing (SPQ), Class of Service (CoS), IP source guard |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1as, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, IEEE 802.1Qat, IEEE 802.1Qav, IEEE 802.1BA |
| Processor: | : 800 MHz |
| RAM: | 512 MB |
| Flash Memory: | 128 MB |
| Expansion / Connectivity |
| Interfaces: | 24 x 1000Base-T RJ-45
2 x 10GBase-T RJ-45 uplink/stacking
2 x 10Gbit LAN SFP+ uplink/stacking
1 x USB 2.0 Type A |
| Power |
| Power Device: | Internal power supply |
| Voltage Required: | AC 100/230 V (50/60 Hz) |
| Power Consumption Operational: | 28.18 Watt |
| Features: | Redundant Power System (RPS) connector |
| Miscellaneous |
| Rack Mounting Kit: | Included |
| MTBF: | 278,559 hours |
| Compliant Standards: | CISPR 22 Class A, cUL, EN 60950, IEC950, UL 1950, EN55024, CSA 22.2 No. 950, EN55022 Class A, EN50082-1, CCC, RoHS, FCC Part 15 A, C-Tick Class A, VCCI Class A |
| Localisation: | Latin America, North America, Europe |
| Dimensions&Weight |
| Width: | 44 cm |
| Depth: | 25.7 cm |
| Height: | 4.3 cm |
| Weight: | 3.14 kg |
| Manufacturer Warranty |
| Service&Support: | Limited warranty - replacement - lifetime - response time: next business day
Technical support - lifetime |
| Environmental Parameters |
| Min Operating Temperature: | 0°C |
| Max Operating Temperature: | 50°C |
| Humidity Range Operating: | 0 - 90% (non-condensing) |
| Min Storage Temperature: | -20°C |
| Max Storage Temperature: | 70°C |
| Humidity Range Storage: | 0 - 95% (non-condensing) |
